Deutsch
EnglishCategories
Shipping country
Products description
Epoxy resin 40 minutes laminating resin
The handy small pack for the fieldbox at the lake 140 g
The handy small pack for the fieldbox at the lake 140 g
Finally a high quality resin, in sufficient quantity and setting time! Quality, made in Germany. If you have ever had a bad experience with cheap resins and do not want to repeat this mistake, with this resin your needs are covered. Nothing is worse than a glue joint that comes undone again!
The 40-minute epoxy is a 2K epoxy resin adhesive. Resin and hardener are filled in bottles with 100 g resin each, as well as 40 g hardener
content, resulting in a total quantity of 140 g epoxy.
The adhesive is transparent, solvent-free and its working time is 90 minutes. It can be used to make flat, larger bondings or even hulls. It is suitable for universal assembly and repair of a wide range of materials such as metal, plastic, ceramics, glass, porcelain, stone, wood, concrete and rubber.
Adhesive joints become tensile and slack resistant as well as resistant to aging and media. There is a lasting resistance to water, gasoline and oil. The temperature resistance is up to approx. +120 °C.
Scope of delivery :
100 g resin + 40 g hardener
Suitable materials Metal, stone, concrete, porcelain, wood, glass and many plastics.
Unsuitable materials Polyethylene, polypropylene, Teflon®,polystyrene, soft PVC
Load Low, High, Medium
Resistance Gasoline, alkali, oil, acid, water
The 40-minute epoxy is a 2K epoxy resin adhesive. Resin and hardener are filled in bottles with 100 g resin each, as well as 40 g hardener
content, resulting in a total quantity of 140 g epoxy.
The adhesive is transparent, solvent-free and its working time is 90 minutes. It can be used to make flat, larger bondings or even hulls. It is suitable for universal assembly and repair of a wide range of materials such as metal, plastic, ceramics, glass, porcelain, stone, wood, concrete and rubber.
Adhesive joints become tensile and slack resistant as well as resistant to aging and media. There is a lasting resistance to water, gasoline and oil. The temperature resistance is up to approx. +120 °C.
Scope of delivery :
100 g resin + 40 g hardener
Suitable materials Metal, stone, concrete, porcelain, wood, glass and many plastics.
Unsuitable materials Polyethylene, polypropylene, Teflon®,polystyrene, soft PVC
Load Low, High, Medium
Resistance Gasoline, alkali, oil, acid, water
Temperature range - 40°C to + 100°C (depending on material and construction - higher temperatures also possible. Please refer to the technical data sheet)
Chemical base Epoxy resin
Viscosity high viscosity, medium viscosity
Pot life approx. 40 min (at room temperature)
Bonding technique Wet bonding
Tip:
We also recommend our thixotropic agents, carbon fiber chips, carbon powder for thickening the resin.
For the improvement of glued areas/surfaces we further recommend glass fiber fabric tapes.
See also the "Other accessories" tab.
Viscosity high viscosity, medium viscosity
Pot life approx. 40 min (at room temperature)
Bonding technique Wet bonding
Tip:
We also recommend our thixotropic agents, carbon fiber chips, carbon powder for thickening the resin.
For the improvement of glued areas/surfaces we further recommend glass fiber fabric tapes.
See also the "Other accessories" tab.
