Deutsch
EnglishCategories
Shipping country
Products description
Boat Multi-System Stand NEW
an be turned so that almost the full support can be used. When the support arms are in a vertical position, the clear dimension is approx. 34 cm.
The design of the MultiFix incorporates all the experience gained from previous products. The goal was to develop a model stand for the workbench that can be universally adapted to any conceivable hull shape and that allows the easiest possible access to the model.
To achieve this, the following functions were implemented:
Individual side parts height adjustable (7cm)
Side parts and feet freely positionable in length
Complete support area tiltable (± 29 °)
Rotatable support for different hull shapes
Anti-twist support arms
Magnet holder for magnetic small parts
The elongated holes in the side panels are for fastening the individual holding elements. The adjustable support can be rotated and has a different shape on each side to hold the model securely. The holders can also be used as a fixation. The holding arms are also fixed in a groove and are secured against rotation. This enables a secure hold when working on the model, for example when the MultiFix is tilted or when transporting it in a car.
The tilting mechanism works with 4 ball bearings and 4 wing screws, which can fix the tilting movement. This allows the model to be positioned at any time so that you have the best possible accessibility to the model.
The wooden parts are CNC-milled from high-quality and stable 15 mm birch multiplex.
The wooden parts are glued with 3 mm self-adhesive solid rubber at the support points, so that the model is held securely and is not damaged.
In the Black Edition, the wood is additionally coated with a 220 g/m² phenolic resin coating, which makes the model stand particularly resistant.
Technical data
Dimensions approx. 60 x 40 x 17 cm without ears (LxWxH)
Maximum clearance between the support rods approx. 34 cm
Height adjustment approx. 7 cm
Can be tilted by ± 29 °.
Scope of delivery:
CNC milled parts (unsanded and coherent)
8 x wing screw
4 m rubber pad
8 x threaded inserts with hexagon socket for easy assembly
16 x M6 washer small
4 x ball bearing 626 ZZ
1 x angle spanner 4 mm
1 x magnet 10 x 2
2 x magnet 6 x 3
4 x rubber feet self-adhesive
18 x M6 x 25 flange head screw
4 x M6 x 25 cheese head screw
16 x M6 square nut
8 x 6 x 20 mm wooden dowel
2 x cover cap for aluminium profile
6 x slot nut spring loaded
1 x 580 mm aluminium profile
1 x Illustrated assembly instructions
an be turned so that almost the full support can be used. When the support arms are in a vertical position, the clear dimension is approx. 34 cm.
The design of the MultiFix incorporates all the experience gained from previous products. The goal was to develop a model stand for the workbench that can be universally adapted to any conceivable hull shape and that allows the easiest possible access to the model.
To achieve this, the following functions were implemented:
Individual side parts height adjustable (7cm)
Side parts and feet freely positionable in length
Complete support area tiltable (± 29 °)
Rotatable support for different hull shapes
Anti-twist support arms
Magnet holder for magnetic small parts
The elongated holes in the side panels are for fastening the individual holding elements. The adjustable support can be rotated and has a different shape on each side to hold the model securely. The holders can also be used as a fixation. The holding arms are also fixed in a groove and are secured against rotation. This enables a secure hold when working on the model, for example when the MultiFix is tilted or when transporting it in a car.
The tilting mechanism works with 4 ball bearings and 4 wing screws, which can fix the tilting movement. This allows the model to be positioned at any time so that you have the best possible accessibility to the model.
The wooden parts are CNC-milled from high-quality and stable 15 mm birch multiplex.
The wooden parts are glued with 3 mm self-adhesive solid rubber at the support points, so that the model is held securely and is not damaged.
In the Black Edition, the wood is additionally coated with a 220 g/m² phenolic resin coating, which makes the model stand particularly resistant.
Technical data
Dimensions approx. 60 x 40 x 17 cm without ears (LxWxH)
Maximum clearance between the support rods approx. 34 cm
Height adjustment approx. 7 cm
Can be tilted by ± 29 °.
Scope of delivery:
CNC milled parts (unsanded and coherent)
8 x wing screw
4 m rubber pad
8 x threaded inserts with hexagon socket for easy assembly
16 x M6 washer small
4 x ball bearing 626 ZZ
1 x angle spanner 4 mm
1 x magnet 10 x 2
2 x magnet 6 x 3
4 x rubber feet self-adhesive
18 x M6 x 25 flange head screw
4 x M6 x 25 cheese head screw
16 x M6 square nut
8 x 6 x 20 mm wooden dowel
2 x cover cap for aluminium profile
6 x slot nut spring loaded
1 x 580 mm aluminium profile
1 x Illustrated assembly instructions
